All Parts
All Results
Class
Glass, Rear, Upper, Case/case I.H., New
A-284947A2, 284947A2, 284947A1
CX100, CX50, CX60, CX70, CX80, CX90, MX100, MX100C, MX110, MX120, MX135, MX170, MX80C, MX90C
Dim A (1) 45.50"
Dim B (2) 26.98"
Dim C (3) 14.00"
Dim D (4) 29.00"
Dim E (5) 14.00"
Dim F (6) 22.50"
Channel, Rh, Pickup Reel 41.38", John Deere, New
A-AFH205939, AFH205939, AE57192
450M, 457, 460M, 467, 547, 550M, 557, 558, 559, 559 Silage Special, 560M, 567, 568, 569, 569 Silage Special
Wobble Drive Assy, Sickle Drive, Case/case I.H., New
API338670A1, 100532, 338670A1, 18AP005582, AFH209088
1052, 2042, 2052, 2142, 2152, 2062, 2162
WILL FIT OTHER MAKES AND MODELS
Back Panel, John Deere, New
47801, AXE47801, HXE47801
S650, S660, S670, S680, S690, S760, S770, S780S, S790
TSR Chopper Housing Sheet fits John Deere
Glass, Door RH, John Deere, New
A-R198625, R198625
5083E, 5085E, 5093E, 5093E Limited, 5100E, 5101E, 5101E Limited, 5105M, 5225, 5325, 5425, 5525, 5603, 5625, 5220 (asn 420001-), 5320 (asn 420001-), 5420 (asn 420001-), 5520 (asn 420001-), 6403, 6603
Dim A (1) 23.50"
Dim B (2) 57.00"
Dim C (3) 11.50"
Dim D (4) 30.50"
Dim E (5) 33.00"
Rim, 12X28, 6 Loop Wheel , Universal, New
A-RW12286, RW12286, D9NN1050EA, D9NN1050FA, 31319712G, 363988R92, AL15368, C7NN1050N, D0NN1050A, D4NN1050B, D4NN1050E, D5NN1050A, G45710, T21743
8N
For 13.6 X 28 Tire
C to C Of Lugs Across Rim 24"
Diameter 28.000"
Lugs 6
Type 6 Loop
Width 12.000"
Glass, Fixed Door RH, John Deere, New
A-R186465, R186465
7200, 7210, 7400, 7410, 7510, 7600, 7610, 7700, 7710, 7800, 7810
Glass, Rear, Allis Chalmers, New
A-71502807, 71502807
8010, 8030, 8050, 8070, 4W-305, 4W-220
Dim A (1) 53.250"
Dim B (2) 32.000"
Dim C (3) 62.250"
Dim D (4) 32.000"
Rotor Cone Vane Kit - 3/16" Stainless Steel , Case/case I.H., New
A-428875A2, 428875A2, 428875A1
2388
• A&I rotor vane kits use 3/8" hardware throughout. If installing on a Lowen/ A&I rotor cone, no modifications will be needed. If installing on a OEM rotor cone, 5/16" holes will need to be drilled out to 3/8"
• Vane transport bolts torque 30 to 35 ft lbs
https://aws.epartdirect.com/abs/files/c904/019b4d3b-be8b-7189-a32e-8ea5948bf966.pdf
Glass, Rear, Upper - Hinged, Ford/Nholland, New
A-D6NN94420N10B, D6NN94420N10B, 83909857
TW10, TW15, TW20, TW25, TW30, TW35, TW5
• CLEAR GLASS, "Q" CAB
Dim A (1) 44.00"
Dim B (2) 18.00"
Dim C (3) 48.00"
Dim D (4) 18.00"
Glass, Window - Rear Main, John Deere, New
A-R50758, R50758
4040, 4050, 4055, 4230, 4240, 4250, 4255, 4350, 4430, 4440, 4450, 4455, 4555, 4560, 4630, 4640, 4650, 4755, 4760, 4840, 4850, 4955, 4960, 8430, 8440, 8450, 8560, 8570, 8630, 8640, 8650, 8760, 8770, 8850, 8870, 8960, 8970
• Uses RE249465 weather strip seal
• This Glass Is Held Open With A Latch.
• Latch not included
Dim A (1) 44.75"
Dim B (2) 33.00"
Dim C (3) 50.00"
Glass, Window - Rear Main, Allis Chalmers, New
A-70577185, 70577185
7060, 7000, 7010, 7020, 7030, 7040, 7050, 7080, 7580, 8550
Dim A (1) 31"
Dim B (2) 33"
Dim C (3) 40"
Dim D (4) 33"
Hinge not included
Crankshaft, Engine - Diesel, Ford/Nholland, Used
E2JL6300BA, B9NN6302B
801
HAS GEAR ON IT FOR DSL
GROUND M -20 R - 20 NEEDS POLISHED TO SMOOTH OUT
Engine Crankshaft, John Deere, Used
AA3926R, A3322R
A
Measurements: #1 Main: 2.749", #1 Rod: 2.999", #2 Rod: 2.999", #2 Main: 2.748"
Cam, LH Pickup - Regular Pickup, John Deere, New
A-FH312216, FH312216
447, 448, 457, 458, 466, 467, 547, 557, 567, 568
Door Assy, R.H., Ford/Nholland, Used
87041543
BR7090
Hinge brackets are attached. Paint scorched in a few places. Fits other round balers by part number
Sheave, Outer Half Reverser - High Torque, John Deere, New
WN-AH219367, AH219367
9660STS, 9760STS, 9670STS, 9770STS, 9860STS, 9870STS, S650, S660, S670, S680, S690, S760, S770
Pulley, Reverser - Inner, High Torque Variable Speed, John Deere, New
WN-H223211, H223211
9660STS, 9760STS, 9670STS, 9770STS, 9860STS, 9870STS, S650, S660, S670, S680, S690, S760, S770
Actuator, Chaffer, Case/case I.H., New
A-47421232, 47421232, 84208481, 87711042
7120, 7130, 7230, 7240, 7250, 8120, 8230, 8240, 8250, 9120, 9230, 9240, 9250
Stroke 171mm
Volt 12
Working Load Limit 700N
Sensor, Magnetic, Case/case I.H., New
A-9825943, 9825943
RB455, RB456, RB456A, RB465, RB466, RB565
Sensor gap needs to be no more than 1/8" to 3/16" for proper speed reading
Overall Length 8.23" / 209mm
Thread Size 3/4"-16 UNC RH
Kit, Blade, Straw Chopper, Set OF 6, Case/case I.H., New
A-47796266, 47796266, 84232968, 84141246, 87666976, AM47796266
7010, 7120, 7130, 7230, 7240, 7250, 8010, 8120, 8230, 8240, 8250, 9010, 9120, 9230, 9240, 9250
Crank, Center, With 1.50" (38.1MM) Od, Shaft,, Ford/Nholland, Used
87038893, 87644269
BR7070
PART MAY FIT MORE MAKES AND MODELS
Concave, Wide Spaced RH, Case/case I.H., Used
86976414, 86999097, 84237557, 84237555, 84182111, CAEX010RH, WN-86976414
AFX8010
NO 6 Injection Line, Ford/Nholland, Used
C7NN9A560D, 81819523
8000, 8200, 8400, 8600, 9000, 9200, 9600
Balancer Assy, Case/case I.H., Used
390910A1, 3752C01A2, 84274449
CX100, CX90, CX80
Fits most CX and MX Tractors by part number. Assembly includes oil pump and screen
Shaft, Cross, 1000 Rpm, 27.83", John Deere, Used
AFH208296
569, 560M, 560R, 560PR Premium, 569 Premium, 569SS Silage Special
Pulley, Knife Drive Gearbox, Case/case I.H., New
48150167CNH, 18AP006207, 338585A1, 48150167, 84585269, 47832, 174982, AFH209406
1052, 2042, 2052, 2142, 2152
Door Assy, R.H., Ford/Nholland, Used
87041543, 87041544
BR7090
Hinge brackets are attached. Paint scorched in a few places. Fits other round balers by part number
Sickle Head, Long (21 Holes), Hesston, New
A-901-055, 901-055, 6497416, H15-0151
520, 620, 6400, 6450, 6600, 1014, 6610, 6200, 6550
Door ASSY., Rh,, Ford/Nholland, Used
87041543, 87041544
BR7070 Silage SPL.
Hinge brackets are attached. Fits other round balers by part number
Channel, Lh, Pickup Reel, 41.38", John Deere, New
A-AFH205934, AFH205934, AE57194
450M, 457, 460M, 467, 547, 550M, 557, 558, 500T, 559 Silage Special, 560M, 567, 568, 569, 569 Silage Special
Guard, Rh; Disc Mower, John Deere, New
A-AFH213232, AFH213232, AFH205825, AFH203435, AFH216813, AE56840, AE71333, AE58840
525, 530, 535, 625, 630, 635, 730, 735, 830, 835, 916, 926, 936, 946, 956, 500R, 990, 994, 995
Gear, Cutterbar; 59 Tooth, John Deere, New
A-AFH203695, AFH203695, AE55526, AE58845, AE74057
525, 530, 535, 625, 630, 635, 730, 735, 830, 835, 915, 916, 925, 926, 935, 936, 945, 946, 955, 956
Clutch Pack, 10,000 Lbs, 1000 Rpm, John Deere, New
A-AE58933, AE58933, PM59010000, A-59010000, 59010000, D750000, W59010000DS
447, 457, 467, 547, 557, 567
Disc, Mower Conditioner Turtle, John Deere, New
A-AE70632, AE70632, AE58878
525, 530, 535, 625, 630, 635, 730, 735, 830, 835, 910, 915, 916, 920, 925, 926, 930, 935, 936, 945, 946, 955, 995, 994, 956, C300, C350, C400, C450, C500, R400, R500, S250, S300, S350
Drawbar, Rear, Straight, , Case/case I.H., New
WN-1286969C3, 1286969C3, FC155-008, NO-FC155-008, NO-0188
7130, 7140, 7150, 7230, 7240, 7250, 8930, 8940, 8950
60.62" L, 3" W, 1.75" H, 4 Holes@1.406",5.473",9.473",21.5"
Rim, W10LX16-8B, Cream - Front Wheel , John Deere, New
A-JD3207, JD3207, A-99A900, 99A900, RE50183, 10X16
4430
Concave, LH - Narrow Space Heat Treated 21-1/2", Case/case I.H., New
WN-86976420, 86976420, 84182108, 86999050, 84563345, 84237554, 84228978, A-84563345
Water Pump, Case/case I.H., New
A-A24809, A24809, A48365, A189511
930
This water pump assembly without pulley is new, from the seal to the housing. It is for a 3 groove pulley and the shaft extends 2.5" beyond the bearing. This pump fits the Case-IH Tractor W9 and 930. (NOTE: replaces A24809-R, A24809-RP, A48365)
Dim A (1) For 3 Groove Pulley
Dim B (2) Shaft Extends 2 1/2"
Dim D (4) Beyond Bearing
Glass, Rear, Upper - Sliding, Ford/Nholland, New
A-D6NN9442006F, D6NN9442006F
TW10, TW15, TW20, TW25, TW30, TW35, 233, 2600
Dim A (1) 16.50"
Dim B (2) 31.625"
Dim C (3) 15.125"
Glass, Side, Upper RH / LH, John Deere, New
A-T113465, T113465
410B, 410C
Dim A (1) 19.50"
Dim B (2) 23.25"
Dim C (3) 38.50"
Rim, 8X16, 6 Bolt - 6" Bolt Circle - Cream, John Deere, New
A-99A44, A-E0NN1007NA, E0NN1007NA, A-JD3210, 99A44, 99A441, JD3210, R10X16-6H, AL82490, W8LX16, A-D5NN1007A, D5NN1007A, W66835RP10
4020
Bolt Circle 6"
Capacity 3500 lbs
Lugs 6
Offset .250" Positive
Pilot Hole 4.625"
Size 8L x 16"
Front Half CV W/ Female Tube, Cat 4, 1000 Rpm 1-3/8, John Deere, New
A-AE74691, AE74691, A-DT435921N, DT435921N, AFH207723
568
This replacement half shaft includes a safety guard with a 3" OD. The original shaft found on these machines may have been either 2.75" or 3". If replacing a shaft with the 2.75" you will also need to replace the implement end guard. Available as a complete guard A-WSK250
Glass, Windshield - Tinted, John Deere, New
A-R135976, R135976
8100, 8110, 8200, 8210, 8300, 8310, 8410, 8400, 8100T, 8110T, 8200T, 8210T, 8300T, 8310T, 8400T, 8410T
Carburetor Kit, Farmall H, I.H./FARMALL, New
A-IHCK15, IHCK15, VPD3669
H, HV, W400
Kit contains all parts necessary for major carburetor overhaul. W/ IH Carburetors 50981DA & 50981DC
Glass, Window - Lower Door LH, John Deere, New
A-R50756, R50756
4430
Dim A (1) 19.00"
Dim B (2) 22.00"
Dim C (3) 24.00"
Dim D (4) 10.50"
Driveline, Pto 540 Rpm, BP Size S4, Sft CV W/ Slip Clutch, Case/case I.H., New
A-87643128, 87643128, 86604846
RBX563, RBX442, RBX451, RBX452, RBX453, RBX461, RBX462, RBX463, RBX552, RBX553, RBX5561, RB464, RB554
New Round Baler Driveline. Driveline is a 4 SFT CV (Constant Velocity) Free rotation with slip clutch. The tractor yoke is 1-3/8" 6 spline with quick disconnect collar. The baler end is 1-3/8" 21 spline tapered pin FV42 slip clutch. The driveline C-to-C length is 51". Fits Case-IH, Ford and New Holland Round Balers.
Implement 1 3/8" - 21 spline tapered pin FV42 slip clutch
Length 51" center length on
Size 4 SFT CV free rotation w/slip clutch
Tractor 1 3/8" - 6 spline QD collar
U-joint Assy-half Tractor, Hesston, New
700712444, 93-16346
4750, 4755, 4900, 4910
THIS PART MAY FIT MORE MAKES AND MODELS
Knee, W/ Bushings, I.H./FARMALL, New
A-531260R92, 531260R92, 531260R91
Hydro 100, Hydro 186, Hydro 3488, 1086, 1468, 1486, 1566, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, 766, 786, 886, 966, 986
Glass, Window Lower RH, John Deere, New
A-R50754, R50754
4630
Dim A (1) 19.000"
Dim B (2) 22.000"
Dim C (3) 24.000"
Dim D (4) 10.500"
Glass, Side, Ford/Nholland, New
A-D5NN9425722B, D5NN9425722B
Dim A (1) 20.75"
Dim B (2) 29.00"
Dim C (3) 24.25"
Dim D (4) 29.25"
Glass, Windshield, Upper, I.H./FARMALL, New
A-109133C3, 109133C3
Dim A (1) 45.00"
Dim B (2) 31.75"
Dim C (3) 50.25"
Dim D (4) 31.75"
Spindle, I.H./FARMALL, New
A-405427R92, 405427R92
656, 460, 544
Dim A (1) A - 12.750"
Dim B (2) B - 1.667"
Dim C (3) C - 1.375"
Dim D (4) D - .842"
Front Half CV W/ Female Tube, Cat 5, 540 Pto Shaft, Plastic, John Deere, New
A-AE74294, A-DT53271, DT53271, AE74294, AE55777, AE59635, AE52502, AFH217179, MEAE74294, AM19503506, A-DT53271N, DT53271N, A-510506486, 510506486
435, 535, 447 (bsn - 310000), 457 (bsn - 311100), 457S (bsn - 310500), 467 (bsn - 312600), 467S (bsn - 312100), 547 (bsn - 313850), 557 (bsn - 313950), 567 (bsn -314450)
80 degree constant velocity driveline joint & shaft half with plastic guard. Shaft size: 1-11/16" 20 Spline; Shaft length: 27"; Tractor yoke: 1-3/8" 6 Spline. Series 35/44.
Transmission Drive Shaft Assembly 4X6, John Deere, Used
R69428, R61817, R69427, R78985, AR87998, R78984, R64095
8640
Cap, Hydraulic Oil, John Deere, Used
AR30697
4640, 2510, 3010, 3020, 4000, 4010, 4020, 4030, 4040, 4240, 4440, 4050, 4250, 4450, 4055, 4255, 4455, 4230, 4430, 4555, 4755, 4955, 4560, 4760, 4960, 4630, 4840, 4650, 4850, 5010, 5020, 6030, 8430, 8440, 8640, 8630
Wedge, Keyed Half, 80MM, 3-1/8", Sleeve, John Deere, Used
A4386R, S#: A4386R, R32224
3010, 50, 60, 70, 520, 530, 620, 630, 720, 730, 2355, 2510, 2520, 2555, 2755, 2840, 2855, 2940, 2950, 2955, 3020, 4000, 4010, 4020, 4030, 4230
Hydraulic Pump 45 CC, New Holland, Used
5191804
TM125
Used with SuperSteer Front Axle. Non-CCLS.
Power steering pump seals removed. Backing plate for pump gears has some bad scores (see pictures).
Piston, Engine , Minne-moline, Used
11B18860, C#: 10A18860, 11A18860, 10B10250, 1022362M1, 11B10250, 14F40
G1000
Most available have skirt wear or a rusted wrist pin. One has deformation and scratches mainly on the top.
Transmitter Clean Grain Speed, Shaft 1-3/8 IN., Case/case I.H., New
WN-143956A1, 143956A1, 143956A2, 143956A3
2388, 2166, 2188, 2377, 2577, 2588
Cylinder Head/bare - 4 Valve Head, John Deere, Used
RE553422, C#: R520109
6430 Premium
Magnaflux checked: no cracks. Pitting on various spots.
Our used cylinder heads have been visually inspected for cracks
Cylinder head may require further cleaning, inspection, or machining before use
Additional Handling & Oversize Fees Apply To This Item
Pump Shaft, Allis Chalmers, Used
74061581, 10213
D15, D17, D19, 180, 185, 190
Dimensions: Length: 5.277", Diameter (Bushing): 0.871"
Dipstick, 14.15" Oal, John Deere, Used
AR40751
3020, 3010
14.15" over all length. Cap marked R26175R. Stick marked R33896R.
Dipstick, 14.15" Oal, John Deere, Used
AR40751
3020
14.15" over all length. Cap marked R26175R. Stick marked R33896R.
Pto Driveline, Shear Asy & Tube W.YOKE, Case/case I.H., Used
700723587, 700718736, 700718735
RS561
PART MAY FIT MORE MAKES AND MODELS
safety shield melted
Rockshaft Control Valve, John Deere, Used
AL172261
6415
Steppermotor melted, debris inside. Valves may be okay.
Pulley, Straw Spreader Drive, 10 Inch, Case/case I.H., Used
87757148, 418092A1, DB-160
7088 Axial-flow
Adapter, JD Header / Gleaner LM Combine, Bish Enterprises, Used
BISH-JD/GL-LM, HA-14, 700-0014
Adapter
Rim, 16X42, Dual 10 Bolt , John Deere, Used
RE50911, AR73885, RE33928, RE211634, AR89139
4555, 4755, 4955, 4560, 4760, 4960, 4620, 4640, 4840, 7220, 7810, 8100, 8200, 8300, 8120, 8220, 8570, 8870, 9100, 9200, 9300
Gearbox Asy, Splined Output Shaft 1.35:1, Case/case I.H., Used
700725114, 700737404, 700710131, 4090-0563, 531ADF 116 8
8465
Valve Assy, Reel Drive Flow, I.H./FARMALL, Used
174785C92, 32700-230
1460, 1460 (bsn -22000), 1480, 1480 (bsn -24000), 1440, 1440 (bsn -20000), 715, 815, 915
DH 1/8/18 TURNS HARD
Deflector, RH - Gate Roll, John Deere, New
A-FH312447, FH312447, E126066
Dana Mfd Front Axle Assy, 12-BOLT Hub W/ Diff Lock, New Holland, Used
87454944
T8.275
Complete FWA Axle (MFD)
Wheel, 31X32, 10 Bolt, 11" Pilot, John Deere, Used
84200754, AXE10248, AH223587
9770, 9860, 9670, 9660, 9760, 7230, 8230, 9230, 7120, 8120, 9120, 8240, 9240
Step, Ladder EXT., Case/case I.H., Used
1321701C1
1640, 1660, 1680, 1688, 1666, 2144, 2166, 2188, 2366, 2344, 2388
Remote Valve, Double Acting W/O Check Valves, Bosch, Case/case I.H., Used
1287379C91, 0521609005: BOSCH NO.
CX100
Front Armrest Link, John Deere, Used
R59020
8640, 6600, 6620, 7700, 7720, 8820, 9400, 9500, 9600, 4040, 4430, 8430
Hydraulic Valve Assembly, Ford/Nholland, Used
E9NNR947BB, 47552380, E9NNR947BA, 81871206
6640
For 12x12 Transmission.
Untested.
Straw Spreader, Attachment, John Deere, Used
BH71349
7720
-Straight hoop & unit
-poly covers
-good paddles
Rim, 11X16.1, 8 Bolt, 3-5/8" Neg Offset, Bevel Holes, Gleaner, Used
71314555, W11CX16.1 EWC
L2
2.375" Backside
Rim, 11X16.1, 8 Bolt, 3-5/8" Neg Offset, Bevel Holes, Gleaner, Used
71314555, W11CX16.1 F&H
L2
2.375" Backside
Remote Valve Assembly Double Spool, Ford/Nholland, Used
81864874, 83955650, E9NNB950BB
6640
One unit has chips broken out on the outer lip of the remote couplers
Spindle ASY. RH Extra HD, John Deere, Used
DE20892, CE21514, CE21515, CE20676, DE20890
S680, S780
Sold as an assembly
Spindle ASY. LH Extra HD, John Deere, Used
DE20891, DE31067 LH, CE21515, CE21514, CE20677
S680, S780
Sold as an assembly, No Sensor
Bearing, Tapered Roller, John Deere, New
A-AFH202580, AFH202580, A-WB513058-I, WB513058-I, DAC42760039
Inside Diameter 1.65" (42mm)
Outside Diameter 2.99" (76mm)
Led Utility Light 8", Case/case I.H., Used
UCL23CB
AFX8010
Optronics LED Off-Road Light Bar - 1,550 Lumens - Mixed Beam - Double Row - 9" Long -
Led 52" Light Bar, Case/case I.H., Used
BL58VR
AFX8010
Blazer Off-Road LED Light Bar - 13,489 Lumens - Mixed Beam - Double Row - 52-3/16" Long
Rim, Front Wheel 10X16" 6 Bolt, Ford, New
A-99A992, 99A992, A-D5NN1007B, D5NN1007B, A-86531344, 86531344, 10X16
Bolt Circle 6"
Capacity 3500 lbs
Lugs 6
Offset 1.250" Negative
Pilot Hole 4.625"
Size 10L x 16"
Header, Fuel Filter, Case/case I.H., Used
A62339, C#: A62340, A155489
770, 870, 1070, 1170, 1175, 1270, 1370, 1470, 1570, 2470, 2670, 2870, 2090, 2290, 2390, 2590, 4490, 4690
Cylinder, Hydraulic - Tension , John Deere, Used
AE47219, S#: AE47219, AE53904, AHC10023, AHC11231
535
Maurer Bin Extension - Red, Case/case I.H., Used
9E000005
2188, 1480, 1680, 1688, 2377 Axial-flow, 2388
Ladder, Service 4 Step W/ Extension, Case/case I.H., Used
1319766C91, 1319766C93, 1319766C94, 1319766C92, 1321695C5, 1321695C4, 1321695C3, 1321695C2, 1321695C1, 410531A1, 410531A2, 410715A1, 410715A2, 87552746, 87553827, 87553728
1680
Ladder, Service 6 Step NO Extension, Case/case I.H., Used
87553728, 1319766C93, 1319766C94, 1319766C92, 1319766C91, 1321695C5, 1321695C4, 1321695C3, 1321695C2, 1321695C1, 410531A1, 410531A2, 410715A1, 410715A2, 87552746, 87553827
2588 Axial-flow
Ladder, Service 5 Step Only, Case/case I.H., Used
1319766C93, 1319766C94, 1319766C92, 1319766C91, 1321695C5, 1321695C4, 1321695C3, 1321695C2, 1321695C1, 410531A1, 410531A2, 410715A1, 410715A2, 87552746, 87553827, 87553728
2388
Ladder, Service 5 Step W/ Extension, Case/case I.H., Used
1319766C93, 1319766C94, 1319766C92, 1319766C91, 1321695C5, 1321695C4, 1321695C3, 1321695C2, 1321695C1, 410531A1, 410531A2, 410715A1, 410715A2, 87552746, 87553827, 87553728
2388
Cab Assembly, Case/case I.H., Used
96775C5
7130 Magnum
Early Cab prior Serial Number JJA0018865 (Shift Control Changed)
Oil Pump, Massey Ferguson, Used
1750239M91, C#: Z120L400
TO20, TE20, TO30, 35, 150, 200, 245, 50, 135
Play in pump gears.
Differential & Bevel Gear Drive Ring And Pinion Asy, John Deere, Used
AR43114, AR63373, CN: R43023, CNP: R43031
4630, 4520, 4620
1 Large & 2 small pits in pinion
No seen pits in ring
Ring & Pinion Set, New Holland, Used
94616C2, 48164647
T8.275
Ring gear 758351941055 and differential 758351945704 inventoried separately.
Pinion 758351941055 and bearing cage 758351945732 inventoried separately.
Jack Assembly, New Holland, Used
86534895
640, 644, 650, 654, 660, 664, 688
PART MAY FIT MORE MAKES AND MODELS
Sensor, By-pass Assembly - W/O Moisture Sensor, Case/case I.H., Used
84295601, T#: 84295601, 87387779
7088 Axial-flow
OM - 2388 Combine SN HAJ0295001+ Operator's Manual, Case/case I.H., Used
6-87130, C/N: RAC 6-87130
2388
Rim, 16X42 Wheel Inner Dual 10 Bolt / 16 Stud, Gleaner, New
71384878, ACX2878790, 1000020773, 05148000960
Coupling, Spline, Gearbox Output, New Holland, New
A-87661924, 87661924, 86634418
BR730, BR730A, BR740, BR740A, BR750, BR750A, BR770, BR770A, BR780, BR780A, BR7050, BR7060, BR7070, BR7080, BR7090, Roll-belt 440, Roll-belt 450, Roll-belt 460, Roll-belt 550, Roll-belt 560
For 540 & 1000 RPM applications
Auger, Loading, Bin Tank, John Deere, New
A-AH127730, AH127730, WN-AH127730, AH98302, AH106608, AH108171, AH113813
8820
Center Housing, CV, John Deere, New
A-AE73340, AE73340, A-550-3545, 550-3545, A-87791024, 87791024
Center Housing CV, John Deere, New
A-AE43558, AE43558, A-550-3540, 550-3540, A-AE48992, AE48992, A-AE50746, AE50746, A-AE73558, AE73558, AFH202157, A-86526270, 86526270, 9617364, 89617364
335, 375, 385, 468, 568
Ground Speed Chart Quad-range Long 19-3/8", John Deere, Used
R74897
4430, 4030, 4040, 4240, 4440, 4230
Fits several more John Deer tractor models.
Control Unit, New Holland, Used
86546743, C/N: 86546743, 86533125, 87035281, 86705851, 86625322, 86505931
664
Controller, Lamp Timer, Ngk - Glow Plug, Ford/Nholland, Used
385870300, MODEL: S81NF, SBA385870300, 83965764, SBA385870301
TC35DA
Hydraulic Valve Assembly, Ford/Nholland, Used
E9NNR947BB, 47552380, E9NNR947BA, 81871206
6640SL
For 12x12 Transmission.
Untested.
U-joint Assy-half Implement , Hesston, Used
700712443
4750, 4755, 4900, 4910
THIS PART MAY FIT MORE MAKES AND MODELS
Radiator 4-7/8" Depth, John Deere, New
A-AH169362, AH169362, AH128257, AH133223, AH138940, 219720
9610
Park Cam, John Deere, Used
R43113, CN: R43113
4840, 4520, 4555, 4755, 4955, 4560, 4760, 4960, 4620, 4630, 4640, 4650, 4850
Park Cam, John Deere, Used
R43113, CN: R43113
4840, 4520, 4555, 4755, 4955, 4560, 4760, 4960, 4620, 4630, 4640, 4650, 4850
Cylinder Lift 3-POINT Asy, John Deere, Used
RE52142, AR69663, AR75569
4840, 8430, 8440, 8640, 8450, 8650, 8630
Door, Right Hand Rear, Case/case I.H., Used
87620367: DOOR, 84140983: FRAME, 87707244: GUIDE, 87706351: ROD, 87706354: ROD, 87755442: ROD
7088 Axial-flow
Gear, Idler And Drive, Oliver, Used
101238A, 101252A
1650, 1550, 1555, 1655, 1750, 1755, 1800, 1900, 1950, 770, 880, 660
Bracket Assembly With 3 Levers Hydra Touch, I.H./FARMALL, Used
373256R91, 370104R1, 369774R11, 371396R1, 373259R11, 370112R1, 369815R11, 369827R11, 370123R91, 370117R91
560 F
Push Rod Cover W/ Oil Fill Tube - Dsl 354 Perkins, Oliver, Used
168025A
1850
Uses 2-3/8" oil cap (168030A).
Has paint chips and surface rust, otherwise good.
Steering Valve, John Deere, Used
AR72338, AR90611
4840, 4030, 4040, 4240, 4440, 4055, 4255, 4455, 4230, 4430, 4650, 4850, 4640
Cylinder, Unloading Auger Swing, Case/case I.H., Used
87597336, 175679A2, 87611478, 87337241
2588, 2388, 2188, 2144, 2166, 2366, 2377
Hub, Sheave, New Holland, Used
247374, 166243, 80247374, 188124
114, 116, 903, 905, 907, 909, 910, 912, 1100, 1112, 1114, 1116, 1118
Piston Pump, Eaton, 540RPM, Hesston, Used
7072515, 73418LAD
1014, 1010
Turns and has pressure.
Replaces Cessna pump 7842958.
Brushholder, John Deere, Used
AH161012, TN# AH161012
9670STS, 9770STS, 9570STS, 9470STS, S550, S670, S660
Valve Cover - W/ Top Breather, I.H./FARMALL, Used
690339C3
1086, 1486, 1586, 2288, 5088, 6388, 4186, 1460, 4386, 3588, 3788, 6588, 6788, 7288, 7488, 5288, 5488, 1480, 1470
Valve Cover - NO Center Breather, I.H./FARMALL, Used
676088C5, 676088C1, 676088C2, 676088C3, 676088C4
815, 915, 966, 1066, 1086, 1466, 1566, 4166, Hydro 100, 986, Hydro 186, 3688, 1440, 1486, 1586, 4186, 1460, 3488, 4366, 4386, 1822, 1640
Sts Wide Spread Deflector Assy, John Deere, New
218491
Sts
Includes chopper deck, vanes and support rods
Must order 1 of these along with new chopper unit unless using original tailboard assembly.
Will fit both OEM and TSR choppers.
Transmission Drive Shaft Assembly 4X6, John Deere, Used
R69429, R63929, R63930, R73647, AR87998, R67573, R72181
4640
NO 1 Injection Line, Early Style, Case/case I.H., Used
A156885, A67353
2090, 2094, 2290, 2294, 2394, 2594, 3294, 3594, 4490, 4494
Exhaust Valve, Case/case I.H., Used
A46380, C#: 232018, A70609
4890, 4894, 2870
This engine had good condition valve components. Other valve components may be available but not always inventoried.
Coupler, Extension Half Socket, John Deere, Used
AL111371, AL157377
6400, 6110, 6210L, 6310, 6410, 6200, 6300, 6500
NO 6 Injection Line, Late Style, Case/case I.H., Used
A76650, A156884
1570, 2670, 4490, 2390, 2590, 4690, 4694
NO 5 Injection Line, Late Style, Case/case I.H., Used
A76649, A156883
1570, 2670, 4490, 2390, 2590, 4690, 4694
NO 4 Injection Line, Late Style, Case/case I.H., Used
A76648, A156882
1570, 2670, 4490, 2390, 2590, 4690, 4694
NO 3 Injection Line, Late Style, Case/case I.H., Used
A76647, A156881
1570, 2670, 4490, 2390, 2590, 4690, 4694
NO 2 Injection Line, Late Style, Case/case I.H., Used
A76646, A156880
1570, 2670, 4490, 2390, 2590, 4690, 4694
All options have deep wear marks.
NO 1 Injection Line, Late Style, Case/case I.H., Used
A76645, A156879
1570, 2670, 4490, 2390, 2590, 4690, 4694
All options have deep wear marks.
Oil Drain Plug, Case/case I.H., Used
A46202, A45884, A166208
4890, 4894, 2870
Magnetic drain plug with flow reducer fitting
Injection Pump, Cav, Massey Ferguson, Used
1447324M91, 3362F060, YR735502430
1105
Unit is low pressure, low RPM tested for pop-off; all cylinders fire. Last tested 5/2024.
Injection Pump, Stanadyne, Allis Chalmers, Used
74022317, DBGFC63737FW
200
Unit is low pressure, low RPM tested for pop-off; all cylinders fire. Last tested 5/2024.
Coupling, Splined / Hex, John Deere, Used
FH312150, A-FH312150, E65515
335, 375, 385, 435, 446, 447, 448, 456, 456S, 457, 457S, 458, 458S, 458 Standard, 466, 467, 467S, 468, 535, 540, 545, 546, 547, 550, 556, 557, 558, 566, 567, 568
Sprocket, Spider, Pickup, 40 Teeth, John Deere, New
A-AFH211871, AFH211871, FH316193
Connection, Water Inlet, Massey Ferguson, Used
744468M1, 37762971
2705
One bolt hole is chipped (see picture)
Actuator, Baler, Case/case I.H., New
A-86634125, 86634125, GF12-1045
Oil Filter Assembly, John Deere, Used
T420T : BASE, AM236T: CASE
2010, 1010
Used on 2010 and 1010 tractors on tractor S/n 010001 - 042000.
Water Pump W/ Pulley, John Deere, Used
AR45333, R34058
7700 Combine, 7720
Good spin. Bearings are still tight.
Fuel Return Line, I.H./FARMALL, Used
680316C91, 47957192
1086, 1066, 966, 815, 915, 1440, 1460, 1480, 1640, 1660
Oil Pump, Early Style, Allis Chalmers, Used
74021607, 74022581, C#: 4020058
180, 190, 185
Part number 74021607 not found in book. Replaced by 74022581 (design with separate inlet screen).
Also fits Gleaner combines F & G with 2900 Allis engine.
Plate; Feed, Center, Stainless Steel , John Deere, New
A-AH214214, AH214214, AH164413
620F, 630F, 635F
Cylinder - Hydraulic, Pickup, Hesston, Used
700712122, 700709416, 4590
560, 550, 565A, 4450, 4570, 4550, 4800, 4900, 4910, 4590
Gearbox, John Deere, Used
AE49539, AFH202245, AFH204883
535, 330, 335, 375, 385, 430, 530, 435, 446, 556, 546, 456, 466, 566, 467, 467S, 567
Fuel Tank, I.H./FARMALL, Used
381379R93, 381379R94, 381379R92, 381379R91
1066 F
Pickup available at Mikes Equipment Company
Usually ready in 24 hours.
Carburetor, Zenith ( Nearly Complete), Allis Chalmers, Used
70213348, 09707B, 213348
WD
Nearly complete except fuel bowl gasket and floater pivot pin. One throttle plate screw is broken
Spider, Pickup, John Deere, New
A-FH305023, FH305023
450M, 457, 457S, 458STD, 460M, 547, 550M, 557, 558, 559, 560M, 567, 568, 569
Inside Diameter 2.017"
Overall Diameter 7.28"
Width 2"
Arm, Feederhouse Drum, RH, Case/case I.H., New
WN-1338288C3, 1338288C3, 1338288C2, 1338288C1
1640, 1644, 1660, 1666, 1680, 1682, 1688, 2144, 2166, 2188, 2344, 2366, 2377 Axial-flow, 2388
Pto Shield, John Deere, Used
AE48990, AE55734, AE59667
535, 330, 335, 375, 385, 435, 446, 546, 456, 556, 466, 566
Balancer Assembly, Agco Allis, Used
72219043: HOUSING, 72219045: COUNTERWEIGHT, 72218151: COUNTERWEIGHT, C#: 06512310
6690
Distributor, Delco, Massey Ferguson, Used
182582M91, 1112570
50
For Continental Z134 engine. Used prior to tractor serial number 536249. Untested, but good internals
Injector, C.A.V. (tab Marked "f"), Massey Ferguson, Used
733648M91, 2646151, BKB32SD5085, 5306162
50, 35, 65, 200
For Perkins AD3.152 engine. Tear down engine serial 1893389.
Untested
Balancer Assy, Case/case I.H., Used
390910A1, 3752C01A2, 84274449
CX90, CX100, CX80
Fits most CX and MX Tractors by part number. Assembly includes oil pump and screen
Arm, Cam Pickup Reel, John Deere, Used
AFH205730, AE46839, AE58805
440E, 449, 450E, 450M, 457, 458, 458S, 458STD, 459, 459E, 460M, 468, 468S, 467, 469, 550M, 557, 500T, 558, 559, 560M, 567, 568, 569, 569S, 559S
Gearbox Knife Drive, RH / LH, John Deere, New
18AP009883, DE21086JD, DE21086
600, 700
casting material is stronger than the original, improved lubrification in the lower chamber
Half Sheave, Inner Reverser - Heavy Duty, John Deere, New
18AP010177, H216332JD, H216332
9560, 9660, 9660CTS, 9560STS, 9570STS, 9660STS, 9670STS, 9760STS, 9770STS, 9860STS, S550, S660
Gear Box, Unloading Auger , Case/case I.H., New
18AP008789, 84320052CNH, 84320052
7010, 8010, 9010, 5088 Axial-flow, 6088 Axial-flow, 7088 Axial-flow
Arm, Cam Pickup Reel, John Deere, New
A-AFH205730, AFH205730, AE46839, AE58805
440E, 449, 450E, 450M, 457, 458, 458S, 458STD, 459, 459 Silage Special, 459E, 459S, 460M, 468, 468S, 467, 469, 469 Silage Special, 550M, 557, 500T, 558, 559, 559 Silage Special, 560M, 567, 568, 569, 569 Silage Special
Hydraulic Remote Valve Second Third And Fourth, Case/case I.H., Used
1980450C6, 1980312C1, 1980312C7, C#: 969996, S#: 1980312C1
7130 Magnum
Door Assy, L.H., Ford/Nholland, Used
87041541, 87037615
BR7090
Hinge brackets are attached. Paint has one light scorched spot on edge. Fits other round balers by part number
Connecting Rod, White, Used
30-3158535, 738713M91, C#: 31337230
2-105
Fits other makes & models with Perkins 354 (search by cast number)
Sickle Head W/ Nylon Insert, John Deere, New
H15-0602, AH231842, AXE96333, AXE54395, 491-231842
630FD, 635FD, 640FD, 645FD, 730FD, 735FD, 740FD, 745FD, HD35F, HD40F, HD45F, HD50F, RD40F, RD45F
Top Link Assembly; CAT. II Ball Tractor / Hook Implement, John Deere, New
A-AL176473, AL176473, AL215047, AL78065
Cylinder, Hydraulic - Tension, John Deere, Used
AE52108, AHC11231, AHC10023, AE57402, AE58983, AH210947
566
Choke & Shut-off Control, Diesel - Push Pull Cable, Hesston, Used
7041411
620, 6550, 6555, 6650, 6655, 6600, 6610
Sickle Head, LH, Hesston, New
A-901-018, H15-0390, 6821078, 901-018
1110, 1120, 1150, 6450, 6550, 6650
Rim, 12X28, Power-adjust 4 Rail Wheel , Universal, New
A-PAR12284, PAR12284, 70226270, 226270, 365324R92, 100047AS, 156072A, 10P787, C5NN1050J, AL60764, AM3202T, 1687615M91
For double ramp clamp, holes in rail for stop body screw are parallel to axle, not at angle.
1" Rail Height, .625" Rail Width
Scv Assy, JD Style Straight RH Lever, John Deere, Used
AR82572ASSY, C/N: R65284, 403675
4840, 8440, 8640, 2520, 4230, 4040, 4240, 4440, 4320, 4430, 4455, 4520, 4620, 4630, 4640, 6030, 8430, 8630, 3020
3020 (ASN 123000)
Disc, Blade Mount, Turtle, Ford/Nholland, New
A-87646406, 87646406, 87342192, 87040895, 86620468, 87040894, K87646406, 86515593, 86619364, 87398661
Tube, Regulator Valve TO Manifold, Case/case I.H., Used
A162500
2294
Tube A162500 replaced by A181031 Hydraulic Hose
Sprocket Assembly, Upper Feed Conveyor, Case/case I.H., New
WN-84122242, 84122242
Final Drive, LH, John Deere, Used
AH205893, T#: AH205893, AH163028, AH224517
9560STS, 9660STS, 9760STS, 9860STS
Cylinder, Hydraulic 2' Bore X 16" Stroke, Massey Ferguson, Used
700719621
2856A, 2856, 2956A, 2956, 2846A, 2846
PART MAY FIT MORE MAKES AND MODELS
Hyd Cyl 1-1/2" Bore X 7-1/4" Stroke, Massey Ferguson, Used
700716327
2756, 2756A, 2746, 2746A, 2745A, 2656A
PART MAY FIT MORE MAKES AND MODELS
Cylinder, Hydraulic (2" Bore X 12" Stroke), Massey Ferguson, Used
700714707
2756, 2756A, 2746, 2746A, 2745A
PART MAY FIT MORE MAKES AND MODELS
Stripper, Mower Conditioner, Turtle, John Deere, New
A-AE73088, AE73088
525, 530, 535, 630, 635, 730, 735, 995
Alternator, Delco 12SI - 2PIN, 78A 12V Neg , Hesston, Used
8020828, 1100217
6550, 6650, 8100, 8200, 8400
PART MAY FIT MORE MAKES AND MODELS
Rim, Dual 16X38 10 Bolt Wheel, John Deere, Used
AR89140, C/N: AR89140, RE50908, JD3230, RE20778, RE214647
8450
Rim, 4.5X16, 6 Bolt Front Wheel , Universal, New
A-FW45166, FW45166, AR52506, A38938, E6NN1007LA, E9NN1007SA, K914053, K947937, 1883335M1, 1883335M2, 1883335M3, 535448M1, 3048866R91, 704675R91, 3251239, 53012210, 8N1015C, 8N1015D, 81802273, 82006575, 83988088, 83960326, 83958545, 83900158, 957E1015D, 885741R3, WHS022, 70235086, 70248460, 1KS729A, 10A27293, 30-3040054, 303040054, S.40286
Tractor CV Pto Half; 1 3/8"- 21 Spline, Ford/Nholland, New
A-86592683, 86592683, A-DT65272N, DT65272N, DT65272, 86536185, 87056346, PM19605521, W19605521DS
1431, 1432
PART MAY FIT MORE MAKES AND MODELS
Shoe, Skid, Case/case I.H., New
A-87047426, 87047426, 86572263
Radiator, Aluminum Core, Case/case I.H., Rebuilt
87378361
AFX8010, 8010, 7010, 7210, 7230, 8120 Axial-flow
Gearbox, Wobble Box, Macdon, New
26320MD, 26320, AE34800JD, 18AP010298, 6582183, 87283072, 1056734M91
Driver Kit; Disc Shear Hub, 6 Spline, John Deere, New
A-AE71036, AE71036, AE49067, AE53192, AE57547
Cylinder, Hydraulic - Master - 30' Pickup Reel, Case/case I.H., Used
1272702C93, C/N: 1272702C93, 1272702C94
1010 (bsn -JJC0200000), 1020 (bsn -JJC0215
Used Rear Wheel Assist (rwa) Kit, Gleaner, Used
RWA-8770
R52
This Kit will come with the motors, hoses, valves and the cab switch with 8 bolt 16.9x26 tires and rims.
CALL FOR MORE INFO…
Hub - Bell, Right-hand, Case/case I.H., Used
191248C1
1440, 1460, 1470, 1480, 1640, 1660, 1670, 1666, 1680, 2188, 1688, 2388
Bearing; Roll Drive 50MM, Ford/Nholland, New
A-87660333, 87660333, 86590752
Rim, 16X46 W/12-BOLT Flange Wheel, John Deere, Used
RE51664, C/N: RE51664, RE175536, RE32097
4555, 4755, 4955, 8960, 8760, 8770, 8870, 9200, 930
Glass, Window Side RH / LH, John Deere, Used
R50757, L31700
Tube, Valve Rocker Arm Shaft Oil Inlet,, Ford, Used
86531523, EAF6580A
860
0.25'' OD x 11.82'' L, 1.22'' L
Pto Tractor Half, 1-3/8"-21 1000 Rpm CV Plastic, John Deere, New
A-AE74295, DT53272N, A-DT53272N, AE74295, AE59638, AFH217180, WN-AE74295
435, 446, 447 (bsn -310000), 456, 457 (bsn -311000), 457S (bsn -310500), 466, 467 (bsn -312600), 467S (bsn -312100), 535, 546, 547 (bsn -313850), 556, 557 (bsn -313850), 566, 567 (bsn -314450)
Front Half CV W/ Female Tube, Cat 5, 540 Rpm 1-3/8 , John Deere, New
A-AE73356, AE73356, A-DT535906N, DT535906N, AFH217178
447 (asn 310001+), 457 (asn 311101+), 457S (asn 310501+), 467 (asn 312601+), 467S (asn 312101+), 547 (asn 313851+), 557 (asn 313951+), 567 (asn 314451+)
Concave, RH - Narrow Space Heat Treated 22-1/2", Case/case I.H., New
WN-86976418, 86976418, CIHC8010R4, 86999057, 84182109, 84563344, 84237553, 84228977
AFX8010, 7120, 7230, 7240, 8010, 8120, 8230, 8240, 9120, 9240, 7010, 9230
Straw Chopper W/o 12 Vane Deflector, John Deere, New
7060R, 7060R-1124
S660, S670, S680, S690, S760, S770, S780, S790
TSR Replacement Straw Chopper to fit S-Series Combines.
Rubber Roller, Upper, Hesston, Used
700706617
1130, 1150, 1160, 1170, 8360, 8370, 8380
THIS PART MAY FIT MORE MAKES AND MODELS
Used Rear Wheel Assist (rwa) Kit, Gleaner, Used
RWA-8011
L3
9-BOLT, Auburn Gear Power Wheel
6 015 M5 07, Small Wheel Motor
16.9X24, 2140031
Cylinder, Hydraulic - Gate 1-3/8", John Deere, Used
AH213991, C/N:AH213991, AE50771, AE57401, AHC10866
535
Gear Case - Primary Countershaft - Small Yoke, John Deere, Used
AH154768, C# CE18400, C# H145001
9450, 9550, 9650, 9660, 9770
Equal Angle Hitch, John Deere, Used
AE43173
1600, 1600A, 1525, 1424, 1380
PART MAY FIT MORE MAKES AND MODELS
Cutter Roll Assy, New Holland, Used
86539470 SHAFT, 86506617 BLOCKS (6), 86510958 ROLLS (10), 86527600 KNIFE CARRIAGE
644
Lift Arm 3 Point, Hesston, Used
5131043
100-90
Adjustment shaft with handle on does not slide in and out it is welded solid.
THIS PART MAY FIT MORE MAKES AND MODELS
Sheave, Rotory, Hesston, Used
700130123, CN 700714716
8500
PART MAY FIT MORE MAKES AND MODELS
WORN GROOVES
Weights, 500LBS, Case/case I.H., Used
221481A2, C/N:221481A2, 48043821
8910, 8920, 8930, 8940, 8950, STX275, STX325, STX375, Maxxum 115, Maxxum 125, Maxxum 135, Maxxum 145, Maxxum 150, MX210, MX230, MX255, MX285
Sheet, Top , John Deere, New
18646, HXE18646
S660, S670, S680, S690, S760, S770, S780, S790
HXE18646 TSR Fine Cut Chopper Sheet fits John Deere
Knife Bar Channel W/Pin, John Deere, New
15673, AXE15673
S660, S670, S680, S690, S760, S770, S780, S790
Side Sheet, RH , John Deere, New
70445, AXE70445
S660, S670, S680, S690, S760, S770, S780, S790
TSR RH Chopper Housing Side Wall fits John Deere
Bottom Knife Sheet, John Deere, New
14857, AXE14857
S650, S660, S670, S680, S690, S760, S770, S780, S790
TSR Chopper Counter Knife Housing fits John Deere
Straw Chopper W/o 12 Vane Deflector, John Deere, New
7060R, 7060R-1118
S660 - S790
TSR Replacement Straw Chopper to fit S-Series Combines.
Roll,stripper, New Holland, Used
87390122
RB464, RB564, BR7060, BR7070
THIS PART MAY FIT MORE MAKES AND MODELS
Complete Baler Driveline; 1-3/8"-21 1000 Rpm, John Deere, New
A-AE74295N, A-AE74295SPL, AE74295SPL, AE74295N, AM14503500
567
Constant velocity driveline, 1000 rpm. Driveline Length: 45" C-to-C of Cross Bearings. Tractor end: 1-3/8" - 21 Spline; Implement end: 1-3/8" - 6 Spline Clutch. Clutch torque: 1800 nm - 15,930 lbs. Fits John Deere Round Balers.
• Does not include tab for the wrap sense capability
• Original Walterscheid part.
Implement 1 3/8" 6 Spl. Clutch
Length 45" C to C of Cross Bearings.
Replaces AE74295SPL
Torque Setting 1800 nm - 15930 in. lbs
Tractor 1 3/8" 21 Spl.
Roller, Crimper Rubber, John Deere, Used
AE50822, AFH203508, AE30633, AE33064, AE36502, AE37670, AE48937, AE50237
1600, 1600A
PART MAY FIT MORE MAKES AND MODELS
Driveline; 540 Rpm, BP Size S4, Sft CV W/ Shear Bolt, New Holland, New
A-87643132, 87643132, 86604844, 87516686, 9600269, A-9600269
RBX441, RBX442, BR7060, BR740, BR740A, 630, 634, 638
New CV (Constant Velocity) Driveline Assembly. This is a complete driveline replacement, components from the original will not interchange. Drive is a 4 SFT CV free rotation with shear bolt clutch. The tractor yoke is 1-3/8" 6 spline with quick disconnect collar. The Implement yoke is 1-3/8" 21 spline threaded pin shear bolt. The C-to-C length is 51". Fits Case-IH and Ford / New Holland Round Balers.
Implement 1 3/8" -21 Tapered Pin Shear Bolt
Length 51" Center to Center On U-Joints
Replaces 89600269
Size 4 SFT CV free rotation w/shear bolt clutch
Tractor 1 3/8" - 6 QD Collar
Chaffer, 1-5/8", Corn, LF, Case/case I.H., New
87710706, 1322659C1, 1322659C2, 1322659C3, 1322659C4, 1322659C5, 1322659C6, 138628A1
1680, 1682, 1688, 2188, 2388, 2577, 2588, 2377, 5088, 6088, 7088
Hub, Wheel 8 Bolt, 9/16" Bolts, John Deere, New
A-R49841, R49841
Fuel Line Return, John Deere, Used
AR68961, RE590026, AR50732
4430
AR68961 FUEL LINE RETURN
FUEL LINE FOR THESE JOHN DEERE ENGINES
4430 (ENGINE SERIAL NO. -445569)
4630 (ENGINE SERIAL NO. -445947)
5200 & 5400 FORAGE HARVESTER (6404) (ENGINE SERIAL NO. 335846-445947)
7020 (ENGINE SERIAL NO. 335846- )
7720 (6
Gathering Wheel Kit, Hesston, New
K50428, 700903080, 700901965, 700903079
560, 550, 555S, 555T, 555, 565, 565A, 565T
Injector Line #2, John Deere, Used
AR26500
4010, 4020
FUEL LINE FOR THESE JOHN DEERE ENGINE
4010
4020 (ENGINE SERIAL NO. 065000-090999)
Number one and two lines fit two different injection line sets depending on engine serial break
Injector Line #3, John Deere, Used
AR26501
4010, 4020
AR26501 FUEL LINE NO. 3
FUEL LINE FOR THESE JOHN DEERE ENGINES
4010
4020 (ENGINE SERIAL NO. -073308)
Injector Line #4, John Deere, Used
AR26502
4010, 4020
AR26502 FUEL LINE NO. 4,
FUEL LINE FOR THESE JOHN DEERE ENGINES
4010
4020 (ENGINE SERIAL NO. 065000-090999)
Injector Line #2, John Deere, Used
AR41543
4520, 4020, 4000
AR41543 FUEL LINE NO. 2
FUEL LINE FOR THESE JOHN DEERE ENGINES
4000, 4020 (POWER SHIFT ESN 215000-246722) (SYNCRO ESN 215000-253763)
4520 (ENGINE SERIAL NO. -242931)
Injector Line #3, John Deere, Used
AR41544
4520, 4020, 4000
AR41544 FUEL LINE NO. 3
FUEL LINE FOR THESE JOHN DEERE ENGINES
4000, 4020 (POWER SHIFT ESN 215000-246722) (SYNCRO ESN 215000-253763)
4520 (ENGINE SERIAL NO. -242931)
Injector Line #4, John Deere, Used
AR41545
4520, 4020, 4000
AR41545 FUEL LINE NO. 4
FUEL LINE FOR THESE JOHN DEERE ENGINES
4000, 4020 (POWER SHIFT ESN 215000-246722) (SYNCRO ESN 215000-253763)
4520 (ENGINE SERIAL NO. -242931)
Injector Line #5, John Deere, Used
AR41546
4520, 4020, 4000
AR41546 FUEL LINE NO. 5
FUEL LINE FOR THESE JOHN DEERE ENGINES
4000, 4020 (POWER SHIFT ESN 215000-246722) (SYNCRO ESN 215000-253763)
4520 (ENGINE SERIAL NO. -242931)
Injector Line #6, John Deere, Used
AR41547
4520, 4020, 4000
AR41547 FUEL LINE NO. 6
FUEL LINE FOR THESE JOHN DEERE ENGINES
4000, 4020 (POWER SHIFT ESN 215000-246722) (SYNCRO ESN 215000-253763)
4520 (ENGINE SERIAL NO. -242931)
Injector Line #4, John Deere, Used
AR57258
4230, 6600, 7700 Combine
AR57258 FUEL LINE NO. 4
FUEL LINE FOR THESE JOHN DEERE ENGINES
4230 (ENGINE SERIAL NO. -499999)
6600 (6404DH) (ENGINE SERIAL NO. 422365-499999)
7700 (6404DH) (ENGINE SERIAL NO. 422365-499999)
Injector Line #3, John Deere, Used
AR57257
4230, 6600, 7700 Combine
AR57257 FUEL LINE NO. 3
FUEL LINE FOR THESE JOHN DEERE ENGINES
4230 (ENGINE SERIAL NO. -499999)
6600 (6404DH) (ENGINE SERIAL NO. 422365-499999)
7700 (6404DH) (ENGINE SERIAL NO. 422365-499999)
Pan, Engine Oil, Oliver, Used
158435A, 37171930
1850
SMALL CRACK ON BOTTOM OF DRAIN PLUG HOLE (SEE PICTURES)
Dipstick, 14.437" Oal, John Deere, Used
AR40510
3020
Female threaded cap. Cap marked R26175R. Stick marked R33896R. Stick measures 14.437" over all length. Stick measures 12.062" from base to full mark.
Gear, Idler, Sledge Roll Drive, 17T, Ford/Nholland, New
A-9806931, 9806931, 9824223, 89806931, 162565
660
Front Half CV W/ Female Tube, Cat 4, 540 Rpm 1-3/8, John Deere, New
A-AE74690, AE74690, DT435906N, A-DT435906N, AFH207722, 9214558659, 92-14558659, RAP6150-WC, R6150-WC
468, 568
This replacement half shaft includes a safety guard with a 3" OD. The original shaft found on these machines may have been either 2.75" or 3". If replacing a shaft with the 2.75" you will also need to replace the implement end guard. Available as a complete guard A-WSK250
Exhaust Manifold, Front, Case/case I.H., Used
87344862, C#: 3968362, 51530962
MX245, Magnum 215, MX215, Magnum 245, Magnum 275, MX275, Magnum 305, MX305
SM - 700 700B 800 800B 730 730B 830 830B Tractor, Prior TO S, Case/case I.H., Used
9-74321
700, 700B, 800, 800B, 730, 730B, 830, 830B
540 Complete Pto Driveline Tractor/Implement, John Deere, New
A-AE74294N, AE74294, AE74294N
435, 535T, 447 (bsn - 310000), 457 (bsn - 311100), 457S (bsn - 310500), 467 (bsn - 312600), 467S (bsn - 312100), 547 (bsn - 313850), 557 (bsn - 313950), 567 (bsn -314450)
Constant velocity driveline, 540 rpm. Driveline Length: 45" C-to-C of Cross Bearings. Tractor end: 1-3/8" - 6 Spline; Implement end: 1-3/8" - 6 Spline Clutch. Clutch torque: 1800 nm - 15,930 lbs. Fits John Deere Round Balers.
Bottom Knife Sheet, Case/case I.H., New
181147, 181147C3, 181147C2, 181147C1, 181147C4, 87379133
1680, 1682, 1688, 2188, 2377, 2388, 2577, 2588, 1482
(includes 2-182894C2 hinge 1-182977C1 rod)
TSR Straw Chopper Deflector Pan Fits
Rear Vane Kit, 3/16" Stainless Steel, Case/case I.H., New
B95480, A-B95480
1640, 1666, 2144, 2166, 2344, 2366
Distributor, Slot Driven, Delco, 4 Cyl, John Deere, Used
AR11162, C#: 1112648, 1112474
3020
Has the electronic ignition installed on it
Twine Assy Stripper, Hesston, Used
700138858, 700720240, 700188734
4790
THIS PART MAY FIT MORE MAKES AND MODELS
Water Pump, Case/case I.H., New
WN-A153454, A153454, 6465A, A-153454, A21459, A21459-R, A48368, A48368-R, A114955, A23305, A11495, A11496, A23306
830
No Pulley, Shaft Extends 2-1/2" Beyond Bearing, Mount Gasket
Arm, Wobble Box, Rigid, John Deere, New
APIH136757JD, H136757, 18AP009925
Carburetor Lp, Early, John Deere, Used
AR26867, AR26505, R26371
4010, 3010, 3020, 4020
Choke and trottle stick. Choke plate is bent. Lever on choke opens but doesn't close.
Early style carburetor used on LP engines prior to engine S/N 58456 and 3020 tractors prior to chasis S/N 123000. Assembly part number isn't in 4010 parts book, but cast number and all component part numbers match.
Carburetor Lp, Early, John Deere, Used
AR26867, AR26505, R26371
3010, 3020, 4010, 4020
Throttle good. Choke good, but missing plate.
Early style carburetor used on LP engines prior to engine S/N 58456 and 3020 tractors prior to chasis S/N 123000. Assembly part number isn't in 4010 parts book, but cast number and all component part numbers match.
Exhaust Manifold, Case/case I.H., Used
377755A1, C#: 3778H242HF, 293168A1, 332203A1
CX90
Fits most C, CX, and MX Series tractors by part number.
Exhaust Manifold, Hesston, Used
37781301, 3778130A, 3778130
6650
Two studs to outlet pipe is sheared off
HYD. Cylinder 2-1/2 X 14, Vermeer, Used
3563-007, 3563007, 24731001, 21061001
504F
PART MAY FIT OTHER MODELS AND MAKES
Shaft, Pto, Ford/Nholland, Used
164047, SHEAVE: 207605, 66888, 80066888, 80164047
1118, 1112, 1114, 1116, 1116D, 1116H, 903, 905, 907, 909, 910, 912
HAS SHEAVE # 207605 ON IT, SELL TOGETHER
Drive Line CV Pto Shaft 540 Rpm - Tractor Half, John Deere, Used
AE51708, AE59635, AE74294, A-AE74294
535T
Pivot Frame - Contour Master, John Deere, Used
AH205161KIT, AH205161, AH214678, AH207294, AH162514, AH164450
9660 Sts
