I.H./FARMALL Parts
5,279 Results
Make
Class
Carburetor Kit, Farmall H, I.H./FARMALL, New
A-IHCK15, IHCK15, VPD3669
H, HV, W400
Kit contains all parts necessary for major carburetor overhaul. W/ IH Carburetors 50981DA & 50981DC
Knee, W/ Bushings, I.H./FARMALL, New
A-531260R92, 531260R92, 531260R91
Hydro 100, Hydro 186, Hydro 3488, 1086, 1468, 1486, 1566, 1586, 3088, 3288, 3488, 3688, 5088, 5288, 5488, 766, 786, 886, 966, 986
Glass, Windshield, Upper, I.H./FARMALL, New
A-109133C3, 109133C3
Dim A (1) 45.00"
Dim B (2) 31.75"
Dim C (3) 50.25"
Dim D (4) 31.75"
Spindle, I.H./FARMALL, New
A-405427R92, 405427R92
656, 460, 544
Dim A (1) A - 12.750"
Dim B (2) B - 1.667"
Dim C (3) C - 1.375"
Dim D (4) D - .842"
Manifold Assembly, Hydraulic Pump Pressure, I.H./FARMALL, Used
370886R91
460 Utility
THIS PART IS 15 9/16" IN OVERALL LENGTH
Valve Assy, Reel Drive Flow, I.H./FARMALL, Used
174785C92, 32700-230
1460, 1460 (bsn -22000), 1480, 1480 (bsn -24000), 1440, 1440 (bsn -20000), 715, 815, 915
DH 1/8/18 TURNS HARD
Bracket Assembly With 3 Levers Hydra Touch, I.H./FARMALL, Used
373256R91, 370104R1, 369774R11, 371396R1, 373259R11, 370112R1, 369815R11, 369827R11, 370123R91, 370117R91
560 F
Valve Cover - W/ Top Breather, I.H./FARMALL, Used
690339C3
1086, 1486, 1586, 2288, 5088, 6388, 4186, 1460, 4386, 3588, 3788, 6588, 6788, 7288, 7488, 5288, 5488, 1480, 1470
Valve Cover - NO Center Breather, I.H./FARMALL, Used
676088C5, 676088C1, 676088C2, 676088C3, 676088C4
815, 915, 966, 1066, 1086, 1466, 1566, 4166, Hydro 100, 986, Hydro 186, 3688, 1440, 1486, 1586, 4186, 1460, 3488, 4366, 4386, 1822, 1640
Fuel Return Line, I.H./FARMALL, Used
680316C91, 47957192
1086, 1066, 966, 815, 915, 1440, 1460, 1480, 1640, 1660
Fuel Tank, I.H./FARMALL, Used
381379R93, 381379R94, 381379R92, 381379R91
1066 F
Pickup available at Mikes Equipment Company
Usually ready in 24 hours.
Pump, Hydraulic - 9 Gpm Mcv, I.H./FARMALL, New
A-527397R93, 527397R93, 527397R92, 527397R91
1066
NOTICE: Pump pressure is rated at 2250 PSI, exceeding pressure may damage pump and void warranty.
Dipstick, I.H./FARMALL, Used
368986R91
560, 660, 460, 706
Gauge stick 12" length w/o handle. Fits most Farmall engine styles in the same family (such as 282 and 301; gas and diesel)
Crankshaft Pulley, I.H./FARMALL, Used
3132270R95, C/N: 3059295R2, 3132270R91, 3132270R92, 3132270R93, 3132270R94
826 F, 2826
GOOD GROOVES-VERY LITTLE WEAR HARD RUBBER-WEATHERED/CRACKING
Shaft, Pto 540 Rpm, I.H./FARMALL, New
A-393111R2, 393111R2, 393111R1, WN-393111R2
1066, 1026, 1086, 1206, 1256, 1456, 1466, 1468, 1486, 1566, 1568, 1586, 3088, 3288, 3388, 3488, 3688, 6388, 706, 756, 766, 786, 806, 826, 856, 886, 966
Spindle L.H., I.H./FARMALL, New
A-383912R92, 383912R92
Dim A (1) A - 12.375"
Dim B (2) B - 1.667"
Dim C (3) C - 1.780"
Dim D (4) D - 1.375"
Spindle R.H. , I.H./FARMALL, New
A-383913R92, 383913R92
Dim A (1) A - 12.375"
Dim B (2) B - 1.667"
Dim C (3) C - 1.780"
Pump, Water W/ Hub, I.H./FARMALL, New
701335N, A-701335C92, 701335C92, 701335C91, 328889R1, 749551C91
856
This water pump with hub is completely new, from the seal to the housing and fits multiple Case-IH Industrial / Construction and Tractor models.
Hub 9 Bolt W/ Two Clamps, 3-1/4" Axle W/ Bolts, I.H./FARMALL, Used
387925R1, 380863R2
1026, 1066, 1206, 1256, 1466, 706, 756, 766, 806, 826, 856, 966
Speedometer/Tachometer Gauge - Black, I.H./FARMALL, New
HH388589, 388588R91, 388589R91
Restoration quality gauge with a black background. Housing OD is 4.22" & length is 2.25".
Speedometer/Tachometer Gauge - White, I.H./FARMALL, New
HH103151, HH388589, 388588R91, 388589R91, 66748C1, 398095R91
Restoration quality gauge with a black background. Housing OD is 4.22" & length is 2.25".
Rim, 11X38 Deep Well , I.H./FARMALL, Used
55564D, SU1138H, 11X38DW, EW04151182
M, Super M, Super Mta, H, Super H
Hi-lo-pac Pto Driven Hydraulic Power Pack, I.H./FARMALL, Used
600, E600
B
Dont know enough to identify the actual model info
Rim, Dual 16X38, 9 Bolt, 10.7" Offset, I.H./FARMALL, Used
400879R2, 400879R22, 400879R1, 392918R91
Knotter Assy,, I.H./FARMALL, Used
666510R92
420 (s/n 2662-EARLIER ), 430 (s/n 5755-EARLIER ), 440 (s/n 2159-EARLIER )
Box/Sickle Sections, Plain Hts Sect, I.H./FARMALL, New
634793R2, 634793R1, 634793R3, S20-3644, A-411-091, 05117, 192542
810
Kit, Pto Clutch Pack Disks (9) Steel, (7) Fiber, I.H./FARMALL, New
68803, 68803C2, 68803C1, 68803C91, 68802C91, 68803HD
12" Single Stage Pressure Plate, W/ 1-3/4" 17 Spline Hub, I.H./FARMALL, New
405299, H405299, 405299KIT, 405299R91, 405299R92, 405299R92R, GV73340148
706
Size: 12"
Flywheel Step: 1.406"
Hub Size: 1-3/4"
Spline Count: 17
PPA Levers: 3
PPA Springs: 12 Coil Springs
Flywheel Disc Spec: 6 Large Pads; 1-3/16" 11 Spline Hub; Spring Center
New/Reman: New
Sold As: Each
Warranty: 1 Year
Grille - Steel, I.H./FARMALL, New
AM531231STL, 531231R1, 531231STL
Relief Valve, 2000 P.S.I., I.H./FARMALL, New
HH388208, 388208R93, 388208R92, 388208R91
Max Pressure (PSI)2000
Tune UP Kit, I.H./FARMALL, New
2141-020, ATK2ALR, D104: POINTS, D105: CONDENSER, D123: ROTOR, 400018, 758351021419
7' Sickle, I.H./FARMALL, New
S35-1282, 1210218
Carburetor, Distillate OR Kerosene, IH Model D-10, I.H./FARMALL, Used
45108DB, 45108DC, 45108DD, C#: 6212DB
H
Throttle plate is stuck closed. Possibly had a leak around the main adjusting screw; covered with puddy. Probably needs to be rebuilt.
Pulley, Alternator, Two Groove, I.H./FARMALL, Used
131042C1, 1252602C1
5088
Measurements: 3-3/4" OD; 2-1/4" Wide; 0.670" Bore
CaseIH Dimensions: Inner Diameter: 17.005 mm; Outer Diameter: 95.25 mm; Width: 57.66 mm
Some groove wear
Rocker Arm Shaft, I.H./FARMALL, Used
675660C92
1466
Most of the wear is on the spring and bracket locations. Rocker arm spots have minimal wear.
Inlet Tube, Oil Pump, I.H./FARMALL, Used
690346C2
1460
Used with 1440, 1460 and 1480 combines with engine serial numbers 100078 and after
Crankshaft Pulley, I.H./FARMALL, Used
3059292R93, C/N: 3059295R3
715
Very little groove wear, damper rubber hardened but not very cracked.
Drive Shaft, I.H./FARMALL, Used
45001D, 352079R1
M
Normal amount of bushing wear on the shaft. Nut and threads are kind of loose. Keyway has some slight deformation at the top.
352079R1 replaces 45001D
Drive Shaft, I.H./FARMALL, Used
45001D, 352079R1
M
Normal amount of bushing wear on the shaft. Threads have some nicks.
352079R1 replaces 45001D
Drive Shaft, I.H./FARMALL, Used
45001D, 352079R1
M
Keyway has deformed significantly. Normal amount of bushing wear on the shaft.
352079R1 replaces 45001D
Governor Rockshaft, I.H./FARMALL, Used
48253DA
M, MD, Mdv, H, HV, 400, 300, 450, 350
Has some slight depressions on the bearing surfaces.
Drive Shaft, I.H./FARMALL, Used
45001D, 352079R1
M
Normal amount of bushing wear on the shaft. Has two small dents on the bushing surface, and some slight pitting marks.
352079R1 replaces 45001D
Drive Shaft, I.H./FARMALL, Used
45001D, 352079R1
M
Key has sheared off in the keyway; needs machining. Otherwise normal wear.
352079R1 replaces 45001D
Gear, 29T, I.H./FARMALL, Used
48819D
M
Has some deformation at the top of the keyway; slightly more than normal.
Drive Shaft, I.H./FARMALL, Used
45001D, 352079R1
M
Slight scratching on the bushing surface, probably normal wear.
352079R1 replaces 45001D
Gear, 29T, I.H./FARMALL, Used
48819D
400
Has some deformation at the top of the keyway from normal wear.
Gear, 29T, I.H./FARMALL, Used
48819D
M
Has some deformation on the keyway; a fair amount more than normal.
Housing Bracket, I.H./FARMALL, Used
6733DBX, C/N: 6733D
M
Bushing looks good, nothing wrong with the housing.
Drive Shaft, I.H./FARMALL, Used
352079R1, 45001D
M
Slight scratching on the bushing surface, probably normal wear.
352079R1 replaces 45001D
Lever & Hub, Torque Amplifier - Painted Silver, I.H./FARMALL, Used
537109R92: LEVER, 398803R1: HUB
1066
Lever & Hub, Torque Amplifier - Chrome, I.H./FARMALL, Used
398801R21: LEVER, 398803R1: HUB
806
Some rust on the chrome especially toward the bottom.
Lever is 9-1/2" from hub to grip.
Pin, Actuating Lever, 15.88MM OD X 38.1MM, I.H./FARMALL, Used
374048R1
560 F, 504, 660, 606, 460, 340, 330
Disc, Clutch Inner, I.H./FARMALL, Used
374033R1
504, 660, 606, 460, 340, 330, 560 F
Components inventoried separately.
Disc Asy, Outer, I.H./FARMALL, Used
376825R91
560 F, 504, 606, 660, 340, 330
Components inventoried separately.
Pressure Plate, I.H./FARMALL, Used
374034R1
560 F, 504, 460, 340, 330, 660, 606
Components inventoried separately.
Spider, Adjustment Assembly, I.H./FARMALL, Used
374050R2
560 F, 460, 660, 606, 504, 340, 330
Components inventoried separately.
Crankshaft Pulley, 2 Groove, I.H./FARMALL, Used
683459C94, C#: 684229C91
1466, 1566, 1486, 1586, 3788, 5288, 6788, 7288, 7488, 1480, 1640, 1680
2600 RPM
NO 6 Injection Line, I.H./FARMALL, Used
701233C2
915, 1026, 1256, 1456, 21026, 21256, 21456, 815, 856, 2856
Used with all 407 engines except 1256 and 21256 tractors prior to engine s/n 6663
Used with nozzle assembly 702541C91
Used with nozzle assembly 610718C91
NO 5 Injection Line, I.H./FARMALL, Used
701232C1
915, 1026, 1256, 1456, 21026, 21256, 21456, 815, 856, 2856
Used with all 407 engines except 1256 and 21256 tractors prior to engine s/n 6663
Used with nozzle assembly 702541C91
Used with nozzle assembly 610718C91
NO 4 Injection Line, I.H./FARMALL, Used
701231C1
915, 1026, 1256, 1456, 21026, 21256, 21456, 815, 856, 2856
Used with all 407 engines except 1256 and 21256 tractors prior to engine s/n 6663
Used with nozzle assembly 702541C91
Used with nozzle assembly 610718C91
NO 3 Injection Line, I.H./FARMALL, Used
701230C1
915, 1026, 1256, 1456, 21026, 21256, 21456, 815, 856, 2856
Used with all 407 engines except 1256 and 21256 tractors prior to engine s/n 6663
Used with nozzle assembly 702541C91
Used with nozzle assembly 610718C91
NO 2 Injection Line, I.H./FARMALL, Used
701229C2
915, 1026, 1256, 1456, 21026, 21256, 21456, 815, 856, 2856
Used with all 407 engines except 1256 and 21256 tractors prior to engine s/n 6663
Used with nozzle assembly 702541C91
Used with nozzle assembly 610718C91
NO 6 Injection Line, I.H./FARMALL, Used
701239C1
1256, 21256
Used with nozzle assembly 610715C91 with 1256 and 21256 tractors prior to engine s/n 6663
NO 4 Injection Line, I.H./FARMALL, Used
701237C1
1256, 21256
Used with nozzle assembly 610715C91 with 1256 and 21256 tractors prior to engine s/n 6663
NO 3 Injection Line, I.H./FARMALL, Used
701236C1
1256, 21256
Used with nozzle assembly 610715C91 with 1256 and 21256 tractors prior to engine s/n 6663
NO 2 Injection Line, I.H./FARMALL, Used
701235C1
1256, 21256
Used with nozzle assembly 610715C91 with 1256 and 21256 tractors prior to engine s/n 6663
NO 1 Injection Line, I.H./FARMALL, Used
701234C1
1256, 21256
Used with nozzle assembly 610715C91 with 1256 and 21256 tractors prior to engine s/n 6663
Tube, Oil Pump Inlet, I.H./FARMALL, Used
680896C2
1460
Used with 1440, 1460 and 1480 combines with engine serial numbers prior to 100078
Tube, Oil Pump Inlet, I.H./FARMALL, Used
671822C3
1586
Used with all machines except 4166 and 4186 tractors, 1440, 1460 and 1480 combines, 5088 and 6388 tractors
Screen cover is bent inward. Also a dent in the tube.
Body, Assembly Speed Trans Shift Lockout, I.H./FARMALL, Used
1259721C1: BODY, 1259722C1: SPRING, 1259723C1: PIN
5088
